PROOFMATE® F

PROOFMATE® F

System component of the PROOFMATE® FD system. System component of the PROOFMATE® FD system. Single-com-ponent mastic adhesive and sealing compound based on SPO
(SPO = silane terminated polypropylenoxide)

  • For surface adhesion of PROOFMATE® FD membrane to the structural component,
  • For surface adhesion of film-/film-over-lapping,
  • For edge sealing between PROOFMATE® FD membrane and structural element and in addition for overlapping.

Technical Data

  • Material basis SMP
  • Consistency pasty
  • Spec. density (23°C) ~ 1,5 g/cm3 (DIN EN ISO 2811-1)
  • Dyn. viscosity (23°C) ~ 2000 Pas (DIN EN ISO 2555)

Reaction data at 23°C

  • Processing temperature 5 – 40°C (substrate temperature)
  • pH value ~15 min (ASTM C679)
  • Max. grain size ~ 3 mm/24 h

Cured adhesive

  • Tensile strength ~ 1,3 N/mm2 (DIN EN ISO 527)
  • Elongation at break ~ 350 % (DIN EN ISO 527)
  • Shore A hardness ~ 40 (DIN ISO 7619-1)
  • Temp. resistance -30 bis +80°C
  • Adhesion to concrete > 1,65 N/mm2 (DIN EN 1542)
This site uses cookies. To learn more, see our Privacy Policy