![PROOFMATE RTX System](https://geoforming.com/wp-content/uploads/2022/03/m-proofmate-rtx-system.jpg)
PROOFMATE RTX System
The PROOFMATE RTX SYSTEM is an exterior, strip-shaped waterproofing and connection system for sealing construction joints, predetermined crack cross-sections, building separation, construction and movement joints against pressing water.
It consists of a high-performance sealing tape based on flexible polyolefins (FPO) – the PROOFMATE GR tape – and the two-component, creamy epoxy resin-based PROOFMATE TX-S and TX-W system adhesives.
PROOFMATE GR Tape, which can be welded to conventional TPO/TPE/FPO plastic waterproofing membranes (KDB) and waterstops, can be used as an adhesive joint between structural components such as segments or cast-in-place concrete and plastic waterproofing membranes/waterstops.
The special material base and consistency of the PROOFMATE TX-S and PROOFMATE TX-W system adhesives enables them to be used even on matt damp substrates, as well as for safe processing in horizontal and vertical areas and even overhead.
![PROOFMATE RTX Info](/tph/product/proofmate-rtx-info.jpg)
![PROOFMATE RTX System](/tph/product/proofmate-rtx-system.jpg)
PROOFMATE GR Membrane
System component of the PROOFMATE RTX system. Sealing film based on flexible polyolefin (FPO).
- For sealing construction joints, predetermined crack cross-sections, building separation, construction and movement joints against pressing water
- Can be welded to conventional TPO/TPE/FPO plastic waterproofing membranes (KDB) and joint tapes
- Can also be used as an adhesive joint between structural elements, such as tubbings or cast-in-place concrete and plastic waterproofing membranes / waterstops
- Available thicknesses: 1 mm and 2 mm
- Available widths: 150, 200, 300 and 400 mm
![HYDROFIX GR BAND](/tph/product/hydrofix-h-band.jpg)
~ 1830 g/m² (for 2 mm)
> 5 bar (for 2 mm)
transverse:~ 14 N/mm2 (DIN EN ISO 527-3)
transverse: ~ 1000 % (DIN EN ISO 527-3)
transverse: ~ 100 N (for 1 mm)
transverse: ~ 200 N (for 2mm)
at 25% elongation transverse approx. 3,0 N/mm
at 50% elongation transverse approx. 3.5 N/mm
(DIN EN ISO 527-3)
at 25% elongation transverse approx. 5.6 N/mm
at 50% elongation transverse approx. 6.5 N/mm
(DIN EN ISO 527-3)
PROOFMATE TX-S and PROOFMATE TX-W
System component of the PROOFMATE RTX system. 2-component EP-based adhesive and leveling filler.
- PROOFMATE TX-S is used at a component temperature of 15° to 30° C
- PROOFMATE TX-W is used at lower component temperatures
- Set particularly creamy and sticky
- Safe processing even overhead
- Can also be used on matt damp substrates
- Processing without primer
![PROOFMATE TX](/tph/product/proofmate-tx.jpg)
PROOFMATE TX-S
PROOFMATE TX-W
Accessories
![Spachtel B3](/tph/product/spachtel-b3.jpg)
Metal spatula
![Pressure roller](/tph/product/pressure-roller.jpg)
150mm
![Z2](/tph/product/z2.jpg)
Hand press
![PZ2](/tph/product/pz2.jpg)
Pneumatic hand press
For cleaning the substrate and binding dust and other impurities.
For priming on highly absorbent, dry substrates, such as weathered concrete, clinker, eternit, plaster, natural stone, etc.
![Hot Air Gun](/tph/product/hot-air-gun.jpg)
![Welding Sword](/tph/product/welding-sword.jpg)