SOLID SEAL
High-strength, very fast reacting, non-foaming 2 component injection resin based on silicate
- For grouting of water bearing cracks being > 0,2 mm
- For structural filling of cracks
- For ground and rock stabilization
- Underpinning of massive structural elements
Mixture of A-and B-Component
Processing temperature
15 – 30°C (substrate temperature)
Viscosity of mixture (23°C)
~ 125 mPas (DIN EN ISO 2555)
Mixing ratio A : B
1 : 1 (parts by vol.)
Reaction Data at 23°C
String gel time
~ 40 s (ASTM D7487)
Final curing
~ 20 min
Properties After Curing
Compressive strength
~ 55 N/mm2 (DIN EN 12190)
Bending tensile strength
~ 25 N/mm2 (DIN EN 12390-5)
E-modulus
~ 1200 MPa (DIN EN ISO 527)
Tensile strength
~ 14 N/mm2 (DIN EN ISO 527)
Injection Equipment and Accessories
Well proven, 2 Component Injectionpump, air driven for Polyurethane and Silicate resins
Well proven, 2 Component Injectionpump, air driven for Polyurethane and Silicate resins
For grouting in soil, gravel
Piling Injection Spear
- Length 1000mm
- External G1/4″ thread
Piling Injection Spear HD
- Injection Pipe
- Length 1000mm
- Wall thickness 5mm
- OD 20mm