PROOFMATE® FD Membrane
System component of the PROOFMATE® FD system. Sealing membrane based on EPDM (ethylene propylene diene monomer).
- High elasticity even at low temperatures
- High mechanical properties due to vulcanisation
Technical Data
Material basis
EPDM
Thickness
1 mm
Shore A hardness
65 ± 5 (DIN ISO 7619-1)
Temperature resistance
150°C (long-term) 220°C (short-term)
Tensile strength
8,7 / 8,6 MPa (DIN EN 12311-2)
Elongation at break
531% / 483 % (DIN EN 12311-2)
Joint peel strength
69 N/50 mm (DIN EN 12316-2)
Joint shear resistance
282 N/50 mm (DIN EN 12317-2)
Resistance to impact
300 mm (DIN EN 12691)
PROOFMATE® F Surface Adhesive
System component of the PROOFMATE® FD System. Single-com-ponent mastic adhesive and sealing compound based on SPO. (SPO = Silane Terminated Polypropylenoxide)
- For surface adhesion of PROOFMATE® FD membrane to the structural component,
- For surface adhesion of film-/film-over-lapping,
- For edge sealing between PROOFMATE® FD membrane and structural element and in addition for overlapping.
Technical Data
Material basis
SMP
Consistency
Pasty
Spec. density (23°C)
~ 1,5 g/cm3 (DIN EN ISO 2811-1)
Dyn. viscosity (23°C)
~ 2000 Pas (DIN EN ISO 2555)
Reaction Data at 23°C
Processing temperature
5 – 40°C (substrate temperature)
pH value
~15 min (ASTM C679)
Max. grain size
~ 3 mm/24 h
Cured adhesive
Tensile strength
~ 1,3 N/mm2 (DIN EN ISO 527)
Elongation at break
~ 350 % (DIN EN ISO 527)
Shore A hardness
~ 40 (DIN ISO 7619-1)
Temp. resistance
-30 bis +80°C
Adhesion to concrete
> 1,65 N/mm2 (DIN EN 1542)
Equipment
Spachtel B3
Metal spatula
Pressure roller
150mm
Z2
Hand press
PZ2
Pneumatic hand press
For cleaning the substrate and binding dust and other impurities
For priming on highly absorbent, dry substrates, such as weathered concrete, clinker, eternit, plaster, natural stone, etc.