AQUA TACKSEAL

Hydrophilic rubber based on of semi-vulcanised butyl rubber

  • Assimilates automatically to the shape of construction
  • For sealing of precast elements, shaft rings, channels as well as drains
  • For construction joints
  • Adhering on concrete, metal, glass and synthetic materials
AQUA TACKSEAL
Technical Data
Rubber type
solid rubber
Material basis
butyl rubber, semi-vulcanised
Colour
blue
Spec. density (20°C)
ca. 1,25 g/cm3
Shore A hardness
ca. 50 (DIN ISO 7619-1)
Tensile strength
ca. 1,0 MPa (DIN EN ISO 527)
Elongation at break
ca. 1500 % (DIN EN ISO 527)
Water absorption
ca. 250 Vol.% (DIN EN ISO 62)
Delay coating
no

Use

Sealing of shaft rings

The main use of AQUA TACKSEAL® PE is the sealing of shaft rings against in-situ groundwater. Shaft rings can be sealed using both sockets and rebates. AQUA TACKSEAL® functions on one hand like conventional sliding ring seals through compression, and on the other hand creates additional sealing through adhesion and expansion pressure.

Sealing of shaft rings

AQUA TACKSEAL assimilates automatically to the shape of construction.

Equipment

QUELLFLEX®

One component, hydrophilic sealing compound for bonding of hydrophilic rubber.

HF-Kleber

Neoprene adhesive.

FIX-O-FLEX

Mastic adhesive and sealing compound for gluing on moist surfaces and even under water.

FIX-O-FLEX Surface Cleaner

For cleaning substrates and for bonding dusts and other contamination.

FIX-O-FLEX H

For connection and dilatation joints inside and outside and for permanently elastic sealing.

FIX-O-FLEX Primer

For priming heavily absorbent surfaces such as weathered concrete, brickwork, aerated concrete, eternit, natural stone, etc.

This site uses cookies. To learn more, see our Privacy Policy