HYDROSEAL P
Hydrophilic rubber based on polyurethane
- Economical solution for construction joints
- For construction joints in structural, civil and construction engineering
- Made to measure is possible
Technical Data
Material basis
Polyurethane
Colour
Blue (other colours on request)
Spec. density (20°C)
ca. 0,7 g/cm3
Shore A hardness
ca. 25 (DIN ISO 7619-1)
E-modulus
ca. 0,9 MPa (DIN EN ISO 527)
Tensile strength
ca. 0,4 MPa (DIN EN ISO 527)
Elongation at break
ca. 90 % (DIN EN ISO 527)
Water absorption
(DIN EN ISO 62)
Tap water
ca. 450 Vol.%
4 % salt water
ca. 160 Vol.%
Equipment
One component, hydrophilic sealing compound for bonding of hydrophilic rubber.
Neoprene adhesive.
Mastic adhesive and sealing compound for gluing on moist surfaces and even under water.
For cleaning substrates and for bonding dusts and other contamination.
For connection and dilatation joints inside and outside and for permanently elastic sealing.
For priming heavily absorbent surfaces such as weathered concrete, brickwork, aerated concrete, eternit, natural stone, etc.