ECOPRESS
Injection hose consisting of a slightly-foamed PVC (PVC = polyvinyl chloride) with ribbed surface for better locking into concrete
- For sealing construction joints in reinforced concrete structures
- Suitable for grouting with microfine cement, acrylate gel and polyurethane resin
- Can be multiple injected with microfine cement and acrylate gel
![ECOPRESS](/tph/product/ecopress.jpg)
Equipment
Water pressure tight connection
![Stopper Inner Thread M8](/tph/product/stopper-inner-thread-m8.jpg)
7mm free passage, for cement injection.
![Fast Click Stopper R1/2](/tph/product/fast-click-stopper-r1-2.jpg)
Ball valve R1/2″,
Geka-coupling
![Hose for Bleeding Air From Injection Hoses](/tph/product/hose-for-bleeding-air-from-injection-hoses.jpg)
![Screw-in Connection](/tph/product/screw-in-connection.jpg)
![Protective Box](/tph/product/protective-box.jpg)
![Shutter-plug](/tph/product/shutter-plug.jpg)
For closing airbleed hoses
- For hose inner ø 6mm
- For hose inner ø 10mm
![Shutter Connectors and Cover Caps](/tph/product/shutter-connectors-and-cover-caps.jpg)
![Extension Pipe](/tph/product/extension-pipe.jpg)
M 8, Length 35mm, for shutter connectors for cement injection
![Plastic Clips](/tph/product/plastic-clips.jpg)
For fixing
![Metal Clips](/tph/product/metal-clips.jpg)
For fixing
![Punsh dowel for metal clamp](/tph/product/punsh-dowel-for-metal-clamp.jpg)
With hole diameter of 6,1 mm
![Fixing Clamp](/tph/product/fixing-clamp.jpg)
For fixing injection hoses on metal water stops.
![Clamp](/tph/product/clamp.jpg)
To fix injection hoses like MEDIPRESS, VPRESS and ECOPRESS to PVC water stops
Recommended Grout
Rubber-elastic, 3 C acrylate gel, multi purpose applicable
- Very low viscous acrylate gel with high flexibility
- Very good penetration, even in water filled cracks
- Long term stable. Proven stability of at least 16 years
2-component injection resin based on polyurethane
- Officially approved system
- Proven against water pressure of 7 bars
- Approved for use in CHF and LMSS plants
2-component high flexible injection resin based on polyurethane
- Universal and economical
- Highly flexible < -50°C
Single-component injection material based on extra-fine cement
- Very high compressive-strength
- For injection in cracks above 0.2 mm
Ready to use dry mixture based on cement, non-shrinking.
- For injection in cracks above 0.375 mm
- Non-shrinking
- For VPRESS® injection hose with 10mm inner-Ø