F8000
Single-component injection material based on extra-fine cement
- For injection in cracks above 0.2 mm
- For injection into grouting hoses
- For stabilisation of concrete and brickwork
Substance data
Processing temperature
5 – 30°C (substrate temperature)
pH value
11 – 13,5 (DIN EN ISO 10523)
Max. grain size
≤ 16 µm (d95)
Reaction Data at 20°C
Pot-life
~ 60 min
Start of setting
~ 6 h
End of setting
~ 9 h
Final curing
~ 28 d
Hardened mortar properties
Adhesion to concrete
>1,5 N/mm2 (DIN EN 1542)
E-modulus
~ 15300 N/mm2
Compr. strength
~ 40 N/mm2 (DIN EN 12190)
Injection Hoses
Injection hose consisting of a slightly-foamed PVC with ribbed surface
- Also with 10 mm inner-Ø for special requirements and overlength up to 30 m
- Good locking into concrete
Injection hose consisting of a slightly-foamed PVC with ribbed surface
- Good locking into concrete
- Overlenght approved up to 20 m
Packer / Feed pipes
For screw-in the bleeding air hose
For grouting acrylate gels, polyurethane and epoxy resins
For grouting in soil, gravel
Plugging / Sealing
Liquid to viscous Polyurethane based adhesive for plugging or fixing adhesion packers
Mineral-based rapid bonding cement for rapid curing and plugging during injection
For sealing off drill holes up to Ø 50 mm as well as big cracks and break outs.