Waterproofing Systems and Upgrate Solutions for Fresh and Waste Water Structures
Joint profiles and sealing compound for expansion joints
Box profile based on EPDM.
- For sealing of dilatation joints from 17 up to 100mm
- Three-dimensional absorption of movement
- Waterproof up to 1 bar
- High chemical and mechanical resistance
Mastic adhesive and sealing compound for gluing on moist surfaces and even under water.
Waterproof and highly flexible membrane sealing system for all joints
Sealing membrane based on EPDM (ethylene propylene diene monomer). Thickness: 1 mm.
- High elasticity even at low temperatures
- High compressive strength due to vulcanisation
Flexible Sealing System, Approved for Use in CHF and LMSS Plants
Injection hose consisting of a slightly-foamed PVC with ribbed surface
- Also with 10 mm inner-Ø for special requirements and overlength up to 30 m
- Good locking into concrete
–
2-component injection resin based on polyurethane
- Officially approved system
- Proven against water pressure of 7 bars
- Approved for use in CHF and LMSS plants
Chemical Resistant Sealing System for Construction Joints, Precast Concrete Elements, Shaft Rings and Breakthroughs
Water-swelling rubber based on polychloroprene
- For construction joints in structural, civil and construction engineering
- High chemical resistance against sewage, manure, chemicals aviation fuel (Jet A-1) and deicer
- Integrated pressure limit for small wall dimensions
–
Water-swelling rubber based on of semi-vulcanised butyl rubber
- For sealing of precast elements, shaft rings, channels as well as drains
- Assimilates automatically to the shape of construction
- For construction joints in structural, civil and construction engineering
- Adhering on concrete, metal, glass and synthetic materials
Flexible PC mortar for bonding and sealing
Water-swelling rubber based on polychloroprene
- For construction joints in structural, civil and construction engineering
- High chemical resistance against sewage, manure, chemicals aviation fuel (Jet A-1) and deicer
- Integrated pressure limit for small wall dimensions
Flexible Injection Polyurethane Resin, Approved for Use in CHF and LMSS Plants
2-component injection resin based on polyurethane
- Officially approved system
- Proven against water pressure of 7 bars
- Approved for use in CHF and LMSS plants
Fast Reacting and Effective Systems for Immediate Stopping of Water Inrush
Extremely fast reacting, from ridged to tough elastic, 2K polyurethane resin, which foams up in contact with water